Dr. Vinay Sharma | Department of Electrical Engineering


Dr. Vinay
Research Scholar
Department of Electrical Engineering
School of Engineering (SoE)
Research Scholar
Intel Technology India Pvt Ltd.
Block-SRR-2, Outer Ring Road, Devarabeesanahalli, Bellandur Post, Shiv Nadar University
Bangalore Karnataka
PDF icon Download CV (160.21 KB)
Profile Summary 

Vinay Sharma earned a Bachelor of Technology in Electronics and Communication Engineering in 2012 from Punjab Technical University in Jalandhar, India. He received his Master of Engineering degree in Electronics and Communication Engineering from Thapar University in Patiala, India, in 2015. In 2021, he graduated with a Doctor of Philosophy degree from Shiv Nadar University in Greater Noida, India. In 2022, he began his career in the technology sector by joining Intel Corporation (Bangalore) as a Post Silicon Validation Engineer at the IPEG.



  • RF Tools: CST Studio, Agilent Advanced Design Systems (ADS)
  • Simulation Packages:  MATLAB, Xilinx Vivado, LT Spice.
  • Programming Language: Verilog, Python
  • Process: Photolithography planar fabrication, Antenna testing.
  • Equipment: Vector Network Analyzer (NI PXle-5632), Real-Time Spectrum Analyzer (RSA306b), Digital Storage Oscilloscope, Signal Generator, Calibration kit (SOLT).                
Educational Qualifications 
Shiv Nadar University
Masters of Engineering in Electronics and Communication
Thapar University
Bachelors’ in Electronics and Communication
Punjab technical University
Diploma in Electronics and Communication
Rayat polytechnic
Work Experience 
Post-Silicon Validation Engineer (Electrical Validation),
Intel / IPEG,
I currently work here
Research Assistant/ Teaching Assistant,
Doctoral Researcher
Graduate Researcher ,
Thapar University
Teaching & Research Interests: 

Scholarly Activity

Journal Publications (accepted or published)


Vinay Sharma, Madhur Deo Upadhyay, and Atul Vir Singh, “Travelling Wave Antenna Based MIMO for 5GHz WLAN Band Application with Pattern Diversity,” International Journal of Electronics (Taylor and Francis), Jan. 2022.  doi:10.1080/00207217.2021.2001867.(SCI, Impact factor 1.336)


Vinay Sharma, Ananya Goel, Madhur Deo Upadhyay, and Atul Vir Singh, “A Pi-Shaped Slot Antenna for 5.2 GHz WLANMIMO Application,” IETE J. Res., pp. 1–13, Jan. 2021, doi:.1080/03772063.2021.1873201.(SCI, Impact factor 1.125)


Vinay Sharma, Madhur Deo Upadhayay, Atul Vir Singh, and Jitendra Prajapati, "Hammer-Shaped Element-Based Compact MIMO Antenna for WLAN Application," Progress In Electromagnetics Research Letters, Vol. 97, 121-130, 2021. doi:10.2528/PIERL21031604     (SCI-E)


Raasi Chenna, Vijayadithya Doddi, Sumanth Gurram, Vinay Sharma, Madhur Deo Upadhayay “UWB filter with DMS for Wi-Fi Applications,” Asian Journal for Convergence in Technology, 2019.


  1. Participated in Short term course on “Challenges and opportunities in Engineering after Covid-19” Under Technical Education Quality Improvement Program (TEQIP-III) organized by the Department of Electrical Engg., Maharana Pratap University of Agricultural and Technology, Udaipur during 29th June -03 July 2020.
  2. Participated in the webinar on Satellite Antenna characterization, Test &design by IEEE MTTS and AP-S branch (Jaipur) at Manipal University Jaipur on 7th July 2020
  3. Participated in the 4-day webinar series on "Evolution of RF technology-Role of Academia and   Industry" by Dept. of Electrical & Electronics Engineering, JSS Academy of Technical Education, Noida, during 22- 25 June 2020.
  4. Participated in a webinar on Effective manuscript writing by IEEE MTTS and AP-S branch (Jaipur) at Manipal University Jaipur on 16 June 2020.
  5. Participated in the webinar on “Art and Challenges of writing papers for IEEE transactions” by IEEE Bangalore section on 8th June 2020.
  6. Participated in a Two-day webinar on MIMO antenna for 5G Communications using CST microwave studio suite by IEEE AP-S chapter (Delhi) at Delhi University (South Campus) from 5-6 June 2020.
  7. Conducted a hands-on workshop on CST microwave studio for planar antenna design for undergraduate students for the course on Antenna theory during Aug-Sep 2019 (fall semester).  
  8. Participated and volunteered in faculty development program on Antenna trends, sponsored by Ministry of Electronics and information technology, conducted from 01-05 July 2019 at Shiv Nadar University. 
  9. Worked as an instructor for a 3-day MATLAB workshop organized by the IEEE student chapter at Shiv Nadar University from 23-25 Aug 2017.
  10. Attended workshop on Use of EM beams for the efficient simulation of antenna and scattering problem in International symposium on antennas and propagation held in Phuket, Thailand from 30 Oct- 2 Nov 2017.
  11. Participated in a national workshop on RF and Microwave Design using Agilent Advanced Design Systems (ADS) at GLA University Mathura in March 2016.
  12. Participated in UGC sponsored seminar on “MIMO Wireless Communication Systems” at Thapar University, Patiala.


  1. Presented a paper (online) titled "Compact antenna for multi-input-multi-output applications at 5.8 GHz ISM band" at Two Day Conference on "Role of Electronics Engineers in Current Societal Changes" Under Technical Education Quality Improvement Program (TEQIP-III) organized by the Department of Electronics Engg., MITS, Gwalior during 20th-21st June 2020.
  2. Presented a paper in the 3rd International Conference for convergence in technology held at Pune, India from 6th- 9th April 2018.
  3. Presented a poster in an international symposium on antennas and propagation held in Phuket, Thailand from 30 Oct- 2 Nov 2017.
  4. Presented at the International Conference on Micro-Electronics and Telecommunication Engineering, at Ghaziabad in Sep 2016.
  5. Presented a paper in the International Conference on Recent Advances in Engineering and Computational Sciences held in Chandigarh, India Dec 2015.
  6. Presented a paper at ISF paper presentation organized by IETE student forum on 21st April 2011.
  7. Presented a paper organized by IETE Chandigarh chapter on 2nd Nov 2010.


PhD Projects:

  1. Planar device design: Patch Antenna, uniform phase array and phase shifter are designed. A full-wave simulation is conducted using CST microwave studio. The structures are fabricated on FR4 material using Photo Lithography. The fabricated antenna was then tested using Vector Network Analyzer.
  2. Horn and Coil Antenna Design: The antennas were designed for S-Band using waste material. The fabricated design validates simulation.
  3. Tattoo Antenna: A wearable antenna is simulated in CST Microwave Studio for IoT application.   The design is fabricated on transparency using conductive ink  

  Masters Projects:

  1. Audio Watermarking via EMD:  A research paper is implemented in MATLAB with detailed mathematical modelling for understanding empirical mode decomposition.
  2. Noise removal from received QPSK signal using Adaptive filtering: Formulate mathematical model and simulate in MATLAB. This project was part of the Coursework in Adaptive Digital Signal Processing.
  3. Fuzzy inference system: Fuzzy Logic was used to find dependencies of five interdependent systems. The outcome of the system was correlated to formulate probability models for each system, simulation was conducted using MATLAB.

Bachelors’ Projects

  1. Electronic Voting Machine: A microcontroller 8051 based major project.  
  2. Temperature measurer and controller: A microcontroller-based system used in chemical boilers. The main objective of this project was to sense the temperature in the boiler and control the heat inside the boiler.

Diploma Project 

  1. Ultrasonic Distance Meter: A microcontroller 8051 based project to measure distance using ultrasonic sensors. 

Conference Publications


Vinay Sharma, Madhur Deo Upadhayay and Atul Vir Singh, “Design of Two-Element Antipodal MIMO Antenna for ISM Band Application,” 2021 IEEE Indian Conference on Antennas and Propagation (InCAP), Dec. 2021, MNIT Jaipur, India.


Simulation and Analysis of Actuation Voltage of Electrostatically Actuated RF MEMS Cantilever and Fixed- Fixed Beam Parameters

  1. Vinay Sharma, Madhur Deo Upadhayay and Atul Vir Singh, “Compact antenna for multi-input-multi-output applications at 5.8GHz ISM band,” National Conference on Role of Electronics Engineering in Current Societal Changes (REECSC -2020), June 20- 21, 2020, MITS Gwalior India, sponsored by IETE India.